How hard is the water in Wilkes County, NC?

0.8 grains per gallon

You do not need a softener here.

The median hardness measured in Wilkes County, NC is 14 mg/L as calcium carbonate, which is 0.8 gpg. That is soft on the USGS scale. It comes from 405 samples at 15 sites between 1990 and 2025, drawn from every sampling site in the county, wells and surface water together.

How much it varies here

Half the sites came in between 0.7 and 1.1 gpg. The whole middle of that range gives the same answer, so a test of your own tap is unlikely to change it. Confidence in the county figure: high (how it is measured).

What to do next

You can skip the softener. At 0.8 gpg the most a softener would fix is the odd water spot. If a salesperson in Wilkes County says otherwise, ask to see their reading in grains per gallon and compare it with this one.

More on when a softener is not worth it.

From 0.6 to 1.3 gpg

The softest single sample on record in Wilkes County was 10 mg/L and the hardest 22 mg/L, a 2-fold gap. The top quarter of sites read above 1.1 gpg and the bottom quarter below 0.7 gpg.

Wilkes County against the rest of North Carolina

Among the 99 North Carolina counties with data, Wilkes County is number 76 of 99 counting from the hardest. Across the whole country it is harder than 5% of counties.

Softest in North Carolina: Bertie County at 0.3 gpg. Hardest: Dare County at 63.7 gpg. Closest to Wilkes County: Alexander County (0.8), Catawba County (0.8), Moore County (0.8).